Whether you already have a unit that produces heat but want cold air, need air conditioning for just one room, live in an older home that requires AC, have a very nominal budget or are ready to spend big – check out the different options in air conditioning systems down below, because there is certain to be an option that is right for you.
Room AC units:
These options cool rooms even though they are less efficient and a bit noisier than other units, they additionally provide lower costs given that they are used only in the spaces where they are needed – rather than throughout the whole house.
What window AC units are: These are small units that are mounted in the window. Most options are designed for double-hung windows, however, there are units that can be used in casement windows. Make sure to pick a model for the unit type that you have. These usually come with their own window mounting kits that include sill brackets for supporting the units and side vents that supply an airtight fit.
Pros: You can buy a few of these models in order to adjust the temperature in every room. They can be taken down with ease and stored at the turn of the season.
Cons: You will lose the view that you had from the window. You will also need to take down or winterize these designs once the cold weather season hits.
Through the wall ACs:
What these are: These units are used to cool just one room. They work a lot like window AC units, except these will have to be permanently mounted in the wall.
Pros: You won’t have to block your window view. You will not have to remove your unit and store when winter arrives.
Cons: These are not easy to install in already-built homes. They must be installed in areas where there is no plumbing or electric in the wall. You might find it difficult to cut the required hole in your wall if these structures are comprised of concrete, brick or stone. It can be hard to hide the unit in the winter. Throughout the winter, you will need to seal the unit off in order to keep cold air out of your house.
Free-Standing Portable Units:
What these are: These units weigh about 80 pounds and they are approximately 30 inches tall. They can have one vent or two. Dual vent designs push clean air into rooms and are usually able to cool spaces down quickly.
A number of these units also have wheels which make it easy for people to move them about. These must be connected to a window or other similar space so that the hot air that the unit produces is vented. A number of these options have window venting kits and these can be moved from window to window and are very easy to install.
Pros: They can be moved about. There is no need to window mount these units. A lot of these have features that limit how often the condensation bin has to be emptied, which increases ease of use and prevents mold.
Cons: Pricier than AC units that are window mounted even though they have the same level of cooling ability. Somewhat like central AC.
Mini Split Designs
What These Are: A cross between central and window AC. The compressor is installed at the property exterior and the fan is inside the house, mounted in the wall. There is a copper line that runs in between the indoor and outdoor components.
Pros: These are small and capable of cooling individual spaces. They are good for large households, rooms over garages, room additions and small-sized apartments. These can be mounted on the floor and do not need a window or they can be suspended from the ceiling or hung on the wall. Most have their own remote controls. They are also very quiet, given that the compressor is situated outside.
Cons: These are more costly than room AC units. They do not look built-in like central AC units do.
What these are: These are designed for small spaces where conventional duct work is not possible. Air s forced through feeder ducts that are only 2 inches in diameter.
Pros: Perfect for historical homes. These keep renovation costs low by preserving the walls and ceilings. They are also quiet and use approximately half the air of central AC.
Cons: More costly to install because they need about 5 outlets for every ton of cooling.